Screw Pogo Pins

Screw Pogo Pins
  1. Current Rating: 1A to 60A
  2. Spring Force: 20gf ~5000gf
  3. Gold Plating: 1uin to 200uin
  4. The dimension can be manufactured in different diameters/lengths to fulfill different applications.


Screw Pogo Pin is a new type of threaded pogo pins that can be easily replaced. The method of turning threads on the surface gets the spring needle off the traditional welding method. Therefore, when in use, users can just rotate and tighten the spring needle and when it needs to be replaced, users can just rotate and screw out the spring needle, and then replace the new spring needle.

Screw Pogo Pins adopt the back plug structure, which gets its front section off the traditional riveting method and more convenient in production. What’s more, a hexagonal swivel is added to the front section of the needle tube to increase the area of the front section so that the Screw Pogo Pins are not easy to be damaged under strong impact.


Brass, C3604


Gold plated


Depending on customer requirements


Screw Type


Gold plated, 1uin, 2uin, 3uin, 5uin, 10uin, 20uin, 30uin, more uins can be customized

Cycle life

1,000,000 times

Contact resistance

50m Ohm Max.

Rated current&voltage

1A-60A / 12 V (customizable)




1000 pcs/PE bag, according to customer requirements

Customized Service And Drawing Of Screw Pogo Pins


Applications Of Screw Pogo Pins

1: Consumer electronic products/PCB boards
2: Digital cameras/Medical products/Printer cartridges
3: Golf handles/ Electric vehicles/ Telephony applications
4: Cardiac defibrillators/Car charging /Air purifiers
5: LED flat luminaries/LED flash lights/Tablets/Laptops/PCs
6: Power banks/ Digital products/Small household electrical application
7: Charging products/Signal transmission products etc.

pogo pin application

More Types Of Pogo Pin


Related Products